สิ่งพิมพ์: 4 พฤษภาคม 2021 อัพเดทล่าสุด: 26 มีนาคม 2024

Innovative collaboration: award for jointly developed component


Successful cooperation between KRAIBURG TPE and automobile manufacturer

Collaboration between an automobile manufacturer headquartered in Southern Germany and KRAIBURG TPE has resulted in the creation of an outstanding solution. Future-oriented, sustainable and efficient, the new material was developed in close cooperation with the OEM and is now moving into series production. 

Installed in a wide range of locations within a vehicle, seals are used, among other things, to prevent ingress of water into vehicle interiors through doors, engine compartments, trunk lids or other areas. However, contact and movement between rubber components and those made of materials such as glass, plastic or metal can often result in unwelcome noise. In severe cases, movement is so inhibited that components begin to slide across each other in a jerky fashion known as the stick-slip effect. A manufacturer of premium vehicles and KRAIBURG TPE decided to collaborate closely on the development of solutions to such problems. To date, the highpoint of these joint material development activities has been winning the Best of Award at the 18th MATERIALICA Design Awards.

The conventional way to eliminate the irritating noises caused by the stick-slip effect has been to add an anti-friction coating.  However, it is sometimes impossible to apply these coatings in a completely reliable way, and they also tend to deteriorate as time goes by. When this happens, these irritating noises emerge at a later stage of a vehicle’s lifecycle, bringing a deterioration in quality that OEMs are keen to avoid. A further disadvantage of widely-used tribological anti-friction coatings is that they prevent separation of materials in end-of-life vehicles, severely impairing their recyclability. 

The new approach removes the glaring disadvantage of previous solutions: thanks to the custom-designed material, adapted component and modified material, there is no need for an additional coating. Further advantages include the depot effect (ensuring long-term anti-frictional properties), maximum freedom of design, greater flexibility during processing, fewer processing stages, and savings in both weight and costs. On top of all this, the thermoplastic elastomer used in the new solution can be recovered for in-process recycling. 

An overview of the key data:

  • Siding friction coefficient of the component reduced by up to 90%
  • Abrasion reduced by 50%
  • Material up to 100% recoverable for in-process recycling

 

“The close collaboration with the automobile manufacturer enabled us to make critical progress in the course of the project. In our opinion, the project is a shining example of successful, dependable and sustainable collaboration between a raw material supplier and an OEM, greatly benefiting both parties”, says Dipl. Ing. Florian Vetter, Development – Automotive at KRAIBURG TPE, describing the close cooperation. “The entire project benefited from the OEM’s early involvement, ultimately enabling us to come up with a solution that meets the exact requirements”.

The winners of the 18th MATERIALICA Design + Technology Award were announced on October 20th, 2020 as part of the eMove360° Hybrid 2020 Conference & Exhibition for Mobility 4.0 – electric-connected-autonomous. Mercedes Benz AG and KRAIBURG TPE gained the Best of Award in the material category for Silent materials – best performance in tribological systems.

DOWNLOAD PRESS RELEASE

IN OUR MEDIA PACKAGE YOU WILL FIND COMPREHENSIVE INFORMATION, GRAPHICS AND PICTURES ON THE SUBJECT.

04.05.2021MEDIA PACKAGE FOR Innovative collaboration: award for jointly developed component

Latest News

ปฏิวัติเสาอากาศรถยนต์ด้วยวัสดุ TPE ที่เป็นนวัตกรรมใหม่
26.03.2024 ปฏิวัติเสาอากาศรถยนต์ด้วยวัสดุ TPE ที่เป็นนวัตกรรมใหม่ KRAIBURG TPE ผู้นำที่มีชื่อเสียงในด้านเทอร์โมพลาสติกอีลาสโตเมอร์ ภูมิใจนำเสนอความก้าวหน้าครั้งล่าสุดในด้านวัสดุยานยนต์ – ซีรีส์ THERMOLAST® R RC/UV/AP เฉพาะทาง ktpe_readmore
เครื่องเย็บแผลผ่าตัด
22.03.2024 เครื่องเย็บแผลผ่าตัด ซีรีส์ HC/AP ของ THERMOLAST® H มีการสัมผัสที่ยอดเยี่ยมและพื้นผิวสัมผัสที่นุ่มนวล ทำให้มั่นใจได้ว่าผู้ใช้จะมีที่จับกันลื่นและความสะดวกสบายตามหลักสรีระศาสตร์ระหว่างการใช้งานอุปกรณ์ ktpe_readmore
KRAIBURG TPE ขึ้นเวทีกลางที่ TECH TALK Forum CHINAPLAS 2024
13.03.2024 KRAIBURG TPE ขึ้นเวทีกลางที่ TECH TALK Forum CHINAPLAS 2024 เข้าร่วมกับเราเพื่อค้นหาโซลูชัน TPE ที่ปลอดภัย คุณภาพสูง และทนทานของ KRAIBURG TPE สำหรับบรรจุภัณฑ์เครื่องสำอาง อาหาร ทางการแพทย์ และการดูแลสุขภาพ ktpe_readmore
การปิดผนึกและนวัตกรรมทางประสาทสัมผัสในอุปกรณ์เสมือนจริง
07.03.2024 การปิดผนึกและนวัตกรรมทางประสาทสัมผัสในอุปกรณ์เสมือนจริง ซีรี่ส์ RC/AD1/AP ของ KRAIBURG TPE ช่วยให้ผู้ผลิตมีความได้เปรียบที่โดดเด่น ช่วยให้สามารถสร้างอุปกรณ์ VR และอุปกรณ์เสริมที่ให้ความสำคัญกับความสะดวกสบายและคุณภาพของภาพของผู้ใช้ ktpe_readmore

Our Communication team is happy to assist you.

If you have any questions or would like more information, please contact our press spokesperson.

Bridget Ngang

Juliane Schmidhuber

Mirna Pina