Publication: 01. Tháng 12 2020 Last updated: 25. Tháng 3 2024

Heading into 2021 well prepared: A TPE for sustainable cotton swabs


KRAIBURG TPE supplies reusable cotton swab manufacturer with a thermoplastic elastomer

The days of disposable plastic products are numbered – alternatives are needed. The success of LastObject’s reusable cotton swabs shows that the market is ready for change. The company’s basic and beauty cotton swabs are both made of high-quality materials. To meet all requirements, the tip is made of THERMOLAST® M, a compound from KRAIBURG TPE that is often used for applications in the health sector.

Every day, 1.5 billion cotton swabs are produced worldwide, each to be used only once. And that’s where LastObject’s mission begins: the Danish company aims to promote the “zero waste” movement to make sure that the next generations will also have a clean and healthy world to grow up in. As the first step, this successful Kickstarter project is supplying reusable, hygienic and reliable alternatives to single-use items we use on a daily basis – with great success, they already sold more than 500,000 LastSwabs to happy customers all over the world. LastObject is thus responding successfully to EU Directive 2019/904, which bans single-use plastic products and will be coming into effect from mid-2021.

The basic requirements for their reusable cotton swab, LastSwab, are durability and quick and easy cleaning. Close attention was given to these qualities during the development process. According to the manufacturer, each individual product is designed for up to 1,000 uses. Another requirement was for the product to be skin safe and not cause any irritation when in repeated contact with the skin. It goes without saying that it meets this standard.

In Denmark, KRAIBURG TPE is collaborating closely with Teknisk Agentur, a trusted local distribution partner. The choice of material for the flexible, soft tip was a compound from the THERMOLAST® M series. This compound was also superior to its competitors in relation to processing options, adhesion and look and has the following properties:

  • Hardness: approx. 40 Shore A
  • Tensile strength: 8.0 MPA
  • Elongation at break: 800%
  • Tear resistance: 11.5 N/mm
     

The compound provides adhesion to polypropylene and polyethylene, high abrasion resistance, weldability and freedom from animal ingredients. It is processed using injection molding and extrusion. The rigid stick is made of polypropylene. The case is made of recycled ocean waste plastic (OWP) from the Danish company Zeaplast who collects plastic from the ocean and rivers in southeast Asia and recycles it. The entire product is molded by AMP, a well-known Danish injection molder.

And LastObject is doing more than just following a trend: The product effectively and measurably helps to save raw materials and waste, while reducing the carbon footprint. “It wasn’t only KRAIBURG TPE’s material that helped us implement the project. The entire process was very straightforward – all the way from identifying the product through to the service. KRAIBURG TPE, Teknisk Agentur, their Danish materials distributor, and the injection molder AMP are reliable partners who are helping us make the future more sustainable,” says Nicolas Aagaard, Co-founder at LastObject.

THERMOLAST® M is available worldwide, US DMF listed and translucent.

About LastObject
LastObject is the Danish brand on a mission to break people's single-use habit by creating sustainable alternatives to disposable items we use daily — starting with LastSwab, the first-ever sanitary, reusable Q-tip. Since then the brand has released three more products in 2020. LastObject is based in Copenhagen and was founded in 2018 by Isabel Aagaard, Nicolas Aagaard and Kare Frandsen.

 

The tremendous and rapid success of LastObject’s reusable cotton swabs shows that the market is ready for alternatives to single-use products. The tip is made of THERMOLAST® M from KRAIBURG TPE to meet all requirements. (Image: © 2020 LastSwab)

Tải về thông cáo báo chí

Trong gói phương tiện của chúng tôi, bạn sẽ tìm thấy thông tin toàn diện, đồ họa và hình ảnh về chủ đề này.

01.12.2020gói phương tiện truyền thông cho KRAIBURG TPE supplies reusable cotton swab manufacturer with a thermoplastic elastomer

Latest News

Cách mạng hóa ăng-ten ô tô bằng vật liệu TPE đổi mới
26.03.2024 Cách mạng hóa ăng-ten ô tô bằng vật liệu TPE đổi mới KRAIBURG TPE, nhà sản xuất có tiếng trong lĩnh vực nhựa nhiệt dẻo đàn hồi, tự hào mang đến thành tựu mới nhất của mình trong vật liệu dành cho ô tô – Dòng sản phẩm THERMOLAST® R RC/UV/AP chuyên biệt. ktpe_readmore
Kim bấm phẫu thuật đạt độ bám tối ưu với tay cầm TPE
22.03.2024 Kim bấm phẫu thuật đạt độ bám tối ưu với tay cầm TPE Dòng HC/AP của THERMOLAST® H có cảm giác xúc giác tuyệt vời và bề mặt mềm mại, đảm bảo người dùng có tay cầm chống trượt và sự thoải mái trong quá trình sử dụng thiết bị. ktpe_readmore
KRAIBURG TPE chiếm vị trí trung tâm tại Diễn đàn TECH TALK CHINAPLAS 2024
13.03.2024 KRAIBURG TPE chiếm vị trí trung tâm tại Diễn đàn TECH TALK CHINAPLAS 2024 Hãy tham gia cùng chúng tôi để khám phá các giải pháp TPE an toàn, chất lượng cao và bền bỉ của KRAIBURG TPE dành cho bao bì mỹ phẩm, bao bì tiếp xúc với thực phẩm, y tế và chăm sóc sức khỏe. ktpe_readmore
Cải tiến về độ khít và Cảm giác của Thiết bị Thực tế Ảo
07.03.2024 Cải tiến về độ khít và Cảm giác của Thiết bị Thực tế Ảo Dòng RC/AD1/AP của KRAIBURG TPE mang đến cho các nhà sản xuất những lợi thế đặc biệt, cho phép tạo ra các thiết bị và phụ kiện VR ưu tiên sự thoải mái của người dùng và chất lượng hình ảnh. ktpe_readmore

Our Communication team is happy to assist you.

If you have any questions or would like more information, please contact our press spokesperson.

Bridget Ngang

Juliane Schmidhuber

Mirna Pina